|
| Author |
Message |
|
mojo
|
Post subject: HDD Power Management does not work  Posted: Sat Jan 03, 2009 2:03 pm |
|
Joined: Sat Jan 03, 2009 1:57 pm
Posts: 2
|
|
I am trying to get HDD power management to work - i.e. I want HDDs to spin down when not in use. I set HDDs to turn off after 15 minutes of inactivity, but they always remain on.
I checked the usual things. I don't have indexing or the defragmenter enabled, and I don't have any anti-virus software. In fact, it's a pretty clean install with just drivers and Firefox on it. I did enable SuperFetch but Vista spins down drives with it enabled so I don't think it's that.
Anyone got any ideas/experience?
|
|
|
|
 |
|
Arris
|
Post subject: Re: HDD Power Management does not work Posted: Sat Jan 10, 2009 3:34 pm |
|
Joined: Sat Mar 08, 2008 5:10 pm
Posts: 1065
Location: The Netherlands
|
|
Hello mojo,
Maybe you can find out what the problem is using the Reliability and Performance Monitor in the Disk section. To start this tool click Run in the Start menu, enter perfmon.msc and click OK. Now expand the Disk section and look which processes do the most I/O with the disk you want to shutdown.
Good luck!
_________________
|[ Mainboard: Gigabyte GA-M56S-S3 ]|[ CPU: AMD Athlon 64 X2 6000+ ]|[ RAM: 4096 MB (DDR2-800 SDRAM) ]|[ GPU: NVIDIA GeForce 8600 GT (256 MB) ]|[ OS: Microsoft Windows Server 2008 R2 Enterprise ]|
|
|
|
|
|
|
mojo
|
Post subject: Re: HDD Power Management does not work Posted: Sat Jan 10, 2009 8:51 pm |
|
Joined: Sat Jan 03, 2009 1:57 pm
Posts: 2
|
|
I have checked with the Performance Monitor and nothing seems to be accessing the drives all the time.
It's very strange. Sometimes the power management works, sometimes it does not. I can't figure out what conditions cause it to fail.
|
|
|
|
|
|
|
